How to Propagate Arborvitae from Cuttings

Fall is officially here but that doesn’t mean it’s time to stop propagating. In fact it means that many of the best plants are in their ideal state for hardwood and semi-ripe cuttings. Arborvitae is one such plant that does very well from cuttings taken from autumn to mid-winter.

For an updated post on propagating arborvitae this subject check this out: Propagating Arborvitae from Cuttings

Some Arborvitae propagating tips

  • Take Semi-ripe to ripe cuttings.  Semi-ripe cuttings have put on nearly a full season of growth and are beginning to develop thicker tissues.  Semi-ripe arborvitae cuttings work well for propagation since they have had a longer time to develop and store energy for rooting. They also don’t lose water as quickly as greenwood cutting would. Semi-ripe and hardwood cuttings root slower but more reliably than greenwood cuttings.
  • The cuttings need to be kept moist. Just a little damp and not soaked. Anytime a cutting dries out it is a death sentence for the hopeful plant to be.
  • A regular misting of the leaves or a humidity tent will keep the leaves from losing moisture.

Here is how I take cuttings of arborvitae

Pick Your Cutting Material

First I selected the right type of cutting. I took about 5 different semi-ripe cuttings looking for wood that was mostly brown in color on the outside. Each cutting has several branching leaves extending from the main stem.

Remove the Lower Leaves of the Cutting

Then I peeled back any lower leaves and branches. This removed some of the material the cuttings would need to maintain from the plant for more efficient water use. I peeled back the leaves rather than cut them to actually create wounds for the cutting to get more water through. It also increases the areas for calluses to form which are where the roots will grow.

Rooting Hormone and Sticking the Cutting

Next I added the rooting hormone treatment. I use a powder rooting hormone from Greenlight but there are many products out there that are effective. Just make sure you place the hormone in a separate cup or container before dipping the cutting in otherwise you may contaminate the original container of hormone powder.

Cover the Arborvitae Cuttings

Then I stuck the cuttings into my moist sand medium and placed the whole container into a clear plastic bag. I set the container on a windowsill where it will receive filtered light over the next six-eight weeks. If there is too much moisture in the bag all I need to do is open it for a little while.

rooting arborvitae
Results in about 8 to 12 weeks

Watch How I Propagate Arborvitae from Cuttings

I have also used potting soil as a medium for rooting arborvitae. The advantage in using soil over sand is that once the roots have formed they can receive nutrients from the soil. Either way can work fine though. Watch the video for more info!

More Information in Plant Propagation

More on plant propagation through cuttings.
10 Easy Plants to Propagate
5 More Easy Plants to Propagate

Propagating Pyracantha from Cuttings

Pyracantha with root Here are some rooted cuttings of Pyracantha augustifolia also known as Firethorn. This is a very good plant to use in the landscape for privacy hedges and for attracting wildlife. Birds and insects both love this plant. Insects for its white flowers…

Read More
Propagating Oak Leaf Hydrangea - Cuttings

How to Propagate Oak Leaf Hydrangea through Cuttings

Recently I took a single cutting from an Oak Leaf hydrangea (Hydrangea quercifolia). Oak leaf hydrangeas are beautiful native plants with tall flower panicles. They are a planting choice that I highly recommend. They are more difficult to propagate than a Hydrangea macrophylla but they…

Read More

Plant By Plant Guide of How to Propagate Plants

Here is a little guide on various plants that you can propagate in your home garden. I’ve included the types of propagation where I’ve been successful (seeds, Layering, Division, Cuttings, etc.).  If I can do it so can you! The links in the tables below…

Read More

Hydrangea Propagation (Natural Layering)

Hydrangeas are fantastic garden plants! The flowers are beautiful but even when not in bloom hydrangeas can be a well formed shrub in the garden. Yesterday while walking through the garden I found a hydrangea that had rooted itself on the ground. This is called…

Read More

Propagating Mums for Profit

It’s kind of an odd subject to bring up during spring but propagating mums for profit takes time. Spring is when you have to get started for fall mum sales. For the purposes of this article we are talking about the common chrysanthemum you find…

Read More

Protected: Plant Propagation Presentation

For Plant Propagation Videos check out my YouTube Channel: How to Propagate Plants – Links to plant propagation topic and individual plant posts as well as some basic information on propagating plants.

Read More
1 2 3 4 5 7 8 9 10

11 thoughts on “How to Propagate Arborvitae from Cuttings”

  1. I didn't know you could root arborvitae. That is good to know.They are good looking evergreen shrubs. Many things can be made from them during the holidays.

  2. Now this is news I can use, Dave! We have several expensive evergreens that I would like to propagate but never knew how to choose the right branch to cut. Semi ripe? Can do. Thanks so much. And the sand works best? Check. 🙂
    Frances

  3. Once you get them started, do you plant them outside, or keep them in a pot in the house for winter,? I started some red twig bush like this and wasnt shure if I should put them outside for the winter.
    Jenny

  4. Jenny,

    I'll keep them in a sheltered location like my garage. I have a small plastic greenhouse inside there next to a window to keep them a little warmer. Red Twig dogwood should be fine outside with minimal protection!

  5. Mr. Froogle,

    Unfortunately most of the cuttings in this batch have been unproductive. It's my own fault since I have a bad habit of checking the cuttings too often and not just letting nature take its course. Bottom heat would help them along as well. I'm still waiting to see if any will root but I'm about to give it another go.

  6. Hi Dave,

    Were you able to get any starts on the arborvitae? I was at a nursery yesterday asking questions about this very topic. I was told I could do this process right now. It is now spring. Everything else I have read about this says to do this in the fall. I'm confused, what are your thoughts?

    Thanks – Rhonda

  7. Rhonda,

    I still have some in the garden shed working on growing roots from fall cuttings. You could probably do cuttings of arborvitae in spring also. It's definitely worth trying since it's only a few minutes of effort for a nice payoff!

Comments are closed.